Pando integralCooking 10258 Manual De Uso E Instalación página 127

INOXPAN S.L.
5.4. SHELVES
WARNING: Failure to unplug the appliance during service and cleaning could result in electrical
shock or other personal injury.
REMOVING SHELVES
To prevent damaging the door gasket, make sure to have the door all the way open when pulling
the shelves out of the rail compartment.
• For easy access to the stored contents, you can pull the shelf approximately halfway out of
the rail compartment. However, this unit was designed with a plastic post on each side of the
shelf track to prevent shelf contents from falling.
• When removing the shelf from the inner rails, make sure to remove all shelf contents first.
Then move the shelf to the position where the notches in the shelf are exactly aligned with the
plastic posts and lift the shelf. In order to replace the shelf, repeat this procedure in reverse.
•
To remove the rail racks, pull each shelf to the end outward. Press with your fingers both
plastic notch at the same time, press down the plastic notch from the right side, as shown in
Image A, and lift the plastic notch from the left side, as shown in Image B. Then proceed to
remove the shelf slowly.
Image B
Image A
127
BEVERAGE COOLER