INOXPAN S.L.
2.
Use the UP and DOWN keys to select the fan mode.
F0: Silent mode - energy saving mode (default) F1: DynaClima
mode - half-time
F2: DynaClima mode - full time
3.
Press and hold the UP key for 5 seconds to confirm the selection.
• Audible Tones
1.
Lightly touch and hold the UP key for 5 seconds to enter Setup mode, then touch
the ON key four (4) times.
2.
Use the UP and DOWN keys to select the audible tones.
S0: sensor tone ON, alarm tone OFF
S1: sensor tone ON, alarm tone ON (default) S2: sensor
tone OFF, alarm tone OFF S3: sensor tone OFF, alarm
tone ON S4: sensor tone OFF, alarm tone ON S5: sensor
tone ON, alarm tone ON S6: sensor tone OFF, alarm tone
ON S7: sensor tone ON, alarm tone ON S8: sensor tone
OFF, alarm tone ON
3.
Press and hold the UP key for 5 seconds to confirm the selection.
• Temperature Display
During normal operation, the temperature indicator on the control panel shows the temperature
inside the appliance. The temperature indicator will flash if
A different temperature is being set,
-
Zone temperature deviates more than 5°C (9°F) from the set temperature.
-
The intermittent temperature display ensures that the temperature cannot inadvertently rise or
fall and damage the beverage.
In the event of a power failure (power surge, circuit breaker, etc.), the unit remembers the
previous temperature settings. When the power is restored, the cabinet temperature will return
to the same temperature setting as before the power interruption.
• Temperature Memory Function
In the event of a power failure (power surge, circuit breaker, etc.), the unit remembers the
previous temperature settings. When the power is restored, the cabinet temperature will return
to the same temperature setting as before the power interruption.
• Temperature Alarm
An acoustic alarm will sound if the temperature of one of the zones rises or falls outside
the temperature range. The corresponding temperature indicator shall flash at the same
time and the symbols and shall light up.
The temperature at which the appliance is set determines the temperature that the
appliance recognises as too hot or too cold.
The audible alarm will sound and the temperature display will flash:
- When switching on the appliance, if the temperature inside the appliance is very different from the set
temperature.
- When there has been a prolonged power failure.
- When too many items have been put into the unit at the same time. Or too much
ambient air has entered when rearranging and removing stored items.
- When the door is not properly closed.
- The device is faulty.
122
BEVERAGE COOLER