ST BL 20 Li B Manual De Instrucciones página 75

2. PRODUCT DESCRIPTION
This machine is a garden tool, specifically a portable
battery-powered garden blower.
It basically consists in a motor that activates a rotor which
is able to produce a high-speed air flow..
Intended use and improper use
This machine was designed and manufactured for the
movement and accumulation, by blowing, of leaves,
grass, debris of various limited weight and modest
dimensions.
Any other use that does not comply with the
above, can be dangerous and cause damage to
people and/or property. Examples of improper
use may include, but are not limited to:
• accumulation and collection of inflammable or
explosive products, hot embers or combustion
material without a flame, lit cigarettes, pieces
of glass, sharp objects, metal objects,
stones and any other object that could be
dangerous to the operator and others;
• aiming the air shot towards persons and/or animals;
• allowing object to enter the suction grid;
• using of the machine by more than one person.
IMPORTANT Improper use of the machine will void the
warranty and relieves the Manufacturer of any liability,
placing all responsibility for damage or injury, to him/
herself or third parties, on the user.
IMPORTANT The machine only works with both bat-
teries inserted
.
NOTE The batteries can be charged directly on the ma-
chine with its charging dock
2.1. MACHINE COMPONENTS
(Fig. 1)
A. Power unit
B. Blower tube
C. Handgrip
D. Batteries
E. Battery charger
F. Blower tube release button
G. Start/stop switch
H. Rail for wall fixing
I. Charging dock
J. Loop
Screws and plastic dowels supplied
K.
2.2. SAFETY SIGNS (FIG. 2)
IMPORTANT Any damaged or illegible decals must be
replaced. Order replacement decals from an Authorised
Service Centre
3. ASSEMBLY
IMPORTANT Unpacking and assembly must be
carried out on a flat, solid surface with sufficient space to
move the machine and the packaging.
Before assembling, make sure the batteries
are not inserted in their housing
NOTE The machine can be hung on the wall.
1. Assembling the charging base (Fig.3)
2. Mounting of the rail for fixing to the wall (Fig. 4)
3. Assembly/disassembly of the blower tube (Fig.5)
IMPORTANT Stop the machine and always remove the
batteries whenever the blower tube is removed
4. CONTROLS
• Start/stop switch
stop position (Fig. 6.A.1)
start position (Fig. 6.A.2)
1. it starts/stops the machine and, at the same time, it
engages/disengages the rotation of the rotor;
2. it makes it possible to control the speed of the rotor.
Starting the machine causes the simultaneous
rotation of the rotor.
IT - 4
WARNING!
Read the instructions before
operating the machine.
Use ear protection
.
devices and goggles
DANGER! Projection hazard! Pay
attention to possible flying debris
projected by the air flow.
Keep all persons away from the work
area whilst working
Do not leave the machine in the
rain (or in damp conditions).
Remove the battery
any inspection, cleaning
m a i n t e n a n c e / a d j u s t m e n t
operation on the machine
WARNING! For battery and battery
charger see the dedicated manual
.
(Fig. 6.A):
before
or
.
.