Publicidad
Problem
The performance of the product is
decreased.
There is vibration in the product.
The jaws do not open or close.
The movement of the jaws is incor-
rect.
There is an oil leak.
To transport the product
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
•
To move the product short distances, install the
product on a demolition robot and operate the
demolition robot.
•
To move the product longer distances, lift the
product or put it on a transportation vehicle. Attach
the product safely to the transportation vehicle.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product.
12
Troubleshooting
The hydraulic flow or the hydraulic
pressure is not sufficient.
The screws and bolts are loose or
missing.
There is no hydraulic flow or hydraul-
ic pressure.
The hydraulic hoses are incorrectly
connected.
The hydraulic hoses are loose.
The hoses or couplings are dam-
aged.
Transportation, storage and disposal
Be careful during
Make sure that the lifting
Do not walk or stay below
Cause
•
Attach the lifting equipment to the lifting eyes.
Storage of the product
•
Keep the product in a locked area to prevent access
for children or persons that are not approved.
•
Keep the product in a dry and frost free area.
•
Keep the product in a stable position.
•
Clean and do servicing on the product before long-
term storage.
Disposal of the product
•
Obey the local recycling requirements and applicable
regulations.
•
When the product no longer is used, send it to
a Husqvarna dealer or discard it at a recycling
location.
Solution
Make sure that all hydraulic hoses
and connections are not damaged
and correctly connected.
Speak to a Husqvarna service cen-
ter.
Speak to a Husqvarna service cen-
ter.
Connect the inlet hose on the demoli-
tion robot to the inlet on the product.
Connect the outlet hose on the dem-
olition robot to the outlet on the prod-
uct.
Speak to a Husqvarna service cen-
ter.
Speak to a Husqvarna service cen-
ter.
2141 - 001 - 19.03.2024
Publicidad
