Publicidad
Hydraulic pressure.
WARNING: Risk of crush injuries. There is
always a risk of crush injuries when you
use products with moving parts.
Hot surface.
Risk of injury. Material can fall during
operation. Use personal protective
equipment and keep distance to the
product during operation.
The product agrees with the applicable
EC directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Rating plate
1
2
3
4
1. Product designation
2. Serial number
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
6
10
5
6
Used if there is a risk of
3. Max inlet flow
4. Weight
5. Manufacturer
6. Production year
7. Max inlet pressure
8. Product number
9. Scannable code
10. Product type
The manufacturer's reservation
Husqvarna reserves the right to alter specifications and
instructions for the machine without prior notification.
The machine may not be modified without the
manufacturer's written permission. If the machine is
modified after delivery from Husqvarna and without
the manufacturer's written permission, it is the owner's
responsibility.
Modification can entail new risks for operators, the
machine and the surroundings. These can include
impaired strength or inadequate protection. It is the
responsibility of the owner to specify which alterations
are going to be made and to contact the supplier
of the machine for approval before commencing the
modifications.
Husqvarna does not make representation or warranty on
fitness or compatibility of unapproved tools installed on
the machine and shall not be responsible for the use of
tools not marketed by Husqvarna.
All information and all data in the operator's manual
were applicable at the time the operator's manual was
sent to print.
9
Product damage
We are not responsible for damages to our product if:
8
•
the product is incorrectly repaired.
7
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
Used if there is a risk of
2141 - 001 - 19.03.2024
Publicidad
