Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO SELECT TIGHTENING TORQUE
Cap
position
Approximately 9 in-lbs. (10 kg-cm)
1
Approximately 15 in-lbs. (17 kg-cm)
3
Approximately 23 in-lbs. (26 kg-cm)
7
Approximately 35 in-lbs. (40 kg-cm)
13
Approximately 43 in-lbs. (49 kg-cm)
17
Approximately 52 in-lbs. (60kg-cm)
22
High speed: approximately 78 in-lbs.
Low speed: approximately 346 in-lbs.
NOTE:
The selected content shown in Table 5 indicates the differences according to screw type,
screw size and material used.
CAUTION:
G
While operating the Cordless driver drill, take care not to lock the motor.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
G
Do not tighten too strongly as the screw heads will be damaged.
Table 5
Tightening torque
(90 kg-cm)(DS14DVB)
approximately 96 in-lbs.
(110 kg-cm)(DS18DVB)
(400 kg-cm)(DS14DVB)
approximately 400 in-lbs.
(460 kg-cm)(DS18DVB)
English
Operation example
Machine screw
tightening.
Screw tightening for soft
wood material.
Screw tightening for
hard wood material.
Thick screw tightening.
When used as a drill.
19
Publicidad
