Descargar Imprimir esta página

DeLonghi ELETTA EXPLORE ECAM45X8Y Instrucciones De Uso página 15

Ocultar thumbs Ver también para ELETTA EXPLORE ECAM45X8Y:

Publicidad

Idiomas disponibles

Idiomas disponibles

If the coffee is delivered a drop at a time, too weak and not
creamy enough, or too cold, consult the tutorial on how to
adjust grinding (see section "7.4 Adjust grinder") and sec-
tion "23. Troubleshooting".
If "Energy Saving" mode is activated, there may be a few
seconds delay before the first coffee is delivered.
9.7 Tips for a hotter coffee
To make a hotter coffee, proceed as follows:
perform a hot rinse cycle before making hot drinks (section
"7.1 Rinsing");
warm the cups with hot water using the hot water function
(see section "11. Preparing hot water and hot tea");
increase the coffee temperature (section "7.5 Coffee
temperature").
9.8 Coffee / Cold Brew pot
Coffee Pot and Cold Brew Pot are two coffee drinks to enjoy in
company; Coffee Pot is based on Espresso, light and balanced,
with a fine layer of crema; Cold Brew Pot is based on the Cold
Brew drink, for a refreshing moment to share.
Optional accessory in certain models:
To make the drink, proceed as follows:
1. On the homepage (C), press the image corresponding to
the "Pot" drink you desire (C1);
2. Selection the number of cups to make and the desired
intensity;
Number
Number of
of cups
grindings
2
2
3
3
4
4
5
5
6
6
*
The quantities indicated are approximate and may vary ac-
cording to the type of coffee.
3. Press "Start" to move on to the next step;
4. Hot Coffee Pot:
• Fill the tank (A23) with water and fill the beans contain-
er (A2) as instructed on the display (fig. 17).
Pot
(capacity 33.81 fl oz/1 liter)
Type: DLSC021
EAN: 8004399333642
Total quantity (fl oz / ml)*
Coffee Pot
Cold Brew Pot
8.45 / 250
8.11 / 240
12.68 / 375
12.17 / 360
16.9 / 500
16.23 / 480
21.13 / 625
20.29 / 600
25.36 / 750
24.35 / 720
• Once you have made sure there is sufficient water and
coffee for the drinks you want to prepare, press "Next";
Cold Brew Pot:
Please note:
Before serving Cold Brew drinks, empty out the water tank,
rinse thoroughly and refill with fresh potable water.
• Select the desired intensity: "Original" or "Intense", then
press "Next";
• Fill the tank (A23) with water and fill the beans contain-
er (A2) as instructed on the display (fig. 17).
• Once you have made sure there is sufficient water and
coffee for the drinks you want to prepare, press "Next";
5. Place the coffee pot (D8) under the coffee spouts (A7).
Press "Brew";
6. The appliance starts making the drink with an appropriate
number of grindings for the number of cups to be prepared
and a description of each individual phase (grinding, brew-
ing coffee) appears on the display.
Please note:
"Cancel" or "Stop": press to stop preparation completely and go
back to the homepage.
7. When delivery has ended, press "Save" to save the new set-
tings, or "Cancel" to retain the previous parameters.
8. Press "X" to go back to the homepage (C).
The appliance is ready to be used again.
Please note:
If you save the new settings, they are memorized ONLY in the
selected profile.
SAFETY WARNING:
After making a pot of hot coffee, leave the
appliance to cool for 5 minutes before mak-
ing another drink. Risk of overheating!
9.9 Cleaning the coffee pot
After each use, you should clean the coffee pot (D8) with hot
water and mild washing up liquid.
15
17

Publicidad

loading

Este manual también es adecuado para:

Eletta explore ecam45086s