Assembling the Freezer Drawer
With both hands, pull out each rail simultaneously until
both rails are fully extended.
Hook the door support 1 into the rail tabs 2 on both
sides.
Lower door into final position and tighten the screws 3 .
3
1
2
Make sure you have the correct rail cover for each side.
Left Rail
Cover
Align the tabs on the covers with the assembly holes on
each rail, and snap the rail covers in place to secure.
With the drawer pulled out to full extension, insert the
lower basket 4 in the rail assembly.
WARNING
If the Durabase divider is removed, there is enough
open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to touch or go
near the freezer drawer.
DO NOT step or sit down on freezer drawer.
17
INSTALLATION
Right Rail
Cover
Assembly
Hole
4