Descargar Imprimir esta página

Create Thera Matic Touch Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
E MPT Y I N G COFF E E B EANS
1. This function is used to empty the coffee beans from the container. Use carefully to avoid
damage.
2. Press the grain emptying button
function. At this time, the indicator light will illuminate steadily while the rest of the indi-
cators will turn off.
3. Remove the waste storage tray and empty it.
4. Once grain emptying is completed, the device will automatically enter standby mode.
5. If you want to cancel the function during operation, press the grain emptying button again.
.
6. This function lasts 15 seconds each time, repeat the above operation if there are many
coffee beans left in the bean container.
P OWE R SAV IN G MO DE
• Press and hold the power button
will perform self-test, preheating and self-cleaning, and then enter standby mode.
• In standby mode, press the power button
seconds, and then the device will enter standby mode. At this time, all indicators will turn
off and all functions will be invalidated.
• The device will enter standby mode if no operation is performed for 28 minutes. At this
time, all indicators will turn off and all functions will be invalidated.
A DJ U STI N G THE AMOU NT O F COF F E E
• After the machine starts dispensing coffee, press and hold the button of the type of coffee
you want, the machine will beep and the corresponding indicator of the selected coffee
type will flash, at this time, the machine enters the mode to set the coffee. coffee dispens-
ing amount.
• When the coffee in the cup reaches the required level, release the selected mode button,
the machine will stop working and the newly set coffee dispensing amount will be saved.
• And the range of coffee dispensing quantity is as follows:
• Single Cup Espresso: 30-100ml
• Double cup espresso: 30-100ml x2
• American coffee: 110-180 ml
FACTORY R E SE T
• Press and hold the single cup espresso button
seconds at the same time, then all parameters are recovered to factory default settings.
and the device will begin to perform the emptying
for at least 8 seconds in standby mode. The appliance
the corresponding indicator will flash for 10
and the double cup espresso
for 2
E NGLI SH
13

Publicidad

loading