Create Thera Matic Touch Manual De Instrucciones página 15

Steam Pipe/Stainless Steel Pipe
When to clean:
• Clean after each use.
How to clean:
1. Pull the stainless steel tube down to remove it.
2. Turn the steam wand 90° clockwise and then down to remove it.
3. Rinse them with water and then dry.
4. Follow the above operation in reverse to reassemble the steam pipe/stainless steel tube.
Drip tray
When to clean:
• It is recommended to empty the drip tray every day and clean it once a week.
How to clean:
1. Remove the coffee maker drip tray and top rack.
2. Clean it with water and a neutral soap.
Coffee grinder
When to clean:
• It is recommended to clean the grinder once a week.
How to clean:
1. Turn the grind selector counterclockwise.
2. Remove the internal grinding wheel counterclockwise. Clean it with the cleaning brush
and empty the ground coffee into the gap.
3. Clean the grinding chamber with the cleaning brush.
4. Install the grinding wheel and return the grind selector to its correct position. Then turn
the grind selector.
5. Let the grinder continue running to remove any remaining powder in the grinding cham-
ber (repeat the above operation if coffee powder remains).
6. Turn the grind adjustment knob counterclockwise.
7. Install the grinding wheel clockwise.
8. Install the grinding wheel adjustment button clockwise.
Crafting system support
When to clean:
• It is recommended to check the brewing system once a week.
How to clean:
1. When the appliance is turned on, press the manual cleaning and double cup espresso
button for 1 second. The coffee maker will go into cleaning mode.
2. Open the cover (the appliance will remain in safety protection state) you can clean the
dust inside.
3. Once cleaning is complete, close the door.
4. Press and hold the manual clean button and the double cup espresso button for 1 second
to exit the cleaning function.
E NGLI SH 15