Clean the Rolling Brush
1
Pull on the release tabs to unlock the brush guard, as shown.
2
Lift the rolling brush to remove.
3
Clean the rolling brush with the cleaning tool.
4
Reinstall the rolling brush by inserting the fixed protruding end first.
5
Press down to snap the brush guard into place.
1
3
4
28 EN
2
5
Clean the Side Brush
Foreign substances, such as hair, can easily get tangled in the side brush, so it is best to
clean it regularly.
1
Remove the side brush.
2
Carefully unwind and pull off any hair or substances that are wrapped between the
main unit and the side brush.
3
Use a cloth dampened with warm water to remove dust from the brush or to
gently reshape it.
• Only use the side brush when it is completely dry.
EN 29