Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation
Before using for the first time
CAUTION
Check the medical device before use. Do not use
the medical device if it is damaged. Risk of breaka-
ge.
Make sure that the individual parts have been
disinfected/sterilized, see page 12.
Assembling humidifier
A
B
D
Instructions for Use Humidifier Nebulizer
A Check that the sealing ring is in place in the hou-
sing, and that it is undamaged.
B Push nebulizer onto the jet as far as it will go.
C Push support ring over humidifier bottle.
D Fill humidifier bottle up to mark with distilled wa-
ter.
Screw the humidifier bottle into the housing.
Assembling humidifier to O
or O
DigiFlow
2
Observe the relevant Instructions for Use of the
O
flowmeter or O
2
Check that the sealing ring is in place on the O
flowmeter or O
Close the flow valve on the O
DigiFlow.
Screw humidifier to O
and tighten.
Inhalation/Insufflation device
C
flowmeter
2
DigiFlow.
2
2
DigiFlow.
2
flowmeter or O
2
2
flowmeter or O
DigiFlow
2
2
English / English US
Connect inhalation device or insufflation device
to the humidifier.
Functional test
Open flow valve on the O
flowmeter or O
2
giFlow. At a flow of 5 L/min the nebulizer produc-
es a fine mist.
Operation
NOTE
Use the medical device only within the specified
pressure range and environmental conditions. Ob-
serve section "Technical Data". Otherwise, the cor-
rect functioning of the medical device may be com-
promised.
Di-
2
11
Publicidad
