Switch on the device
1. Press the I button to switch the de-
vice on.
The suction and blowing functions
are switched on.
Operation
ATTENTION
Damage to the device
Always ensure that the cartridge filter
is inserted, for both wet vacuuming and
dry vacuuming.
Dry vacuuming
ATTENTION
Damage to the cartridge filter
When changing from wet to dry vacu-
uming, a wet cartridge filter can be-
come damaged and unusable.
Allow the cartridge filter to dry com-
pletely before dry vacuuming or re-
place it with a dry cartridge.
Replace the cartridge filter as neces-
sary.
1. Insert the filter bag when vacuuming
fine dust.
● The fill degree of the filter bag de-
pends on the amount of dirt vacu-
umed.
● The filter bag must be changed
more frequently when vacuuming
fine dust, sand, etc.
● A damaged filter bag can rupture, so
be sure to change the filter bag in
time.
Wet vacuum cleaning
ATTENTION
Damage due to moisture
Do not use a filter bag for wet vacuum
cleaning.
Note
When the container is full, a float
switch closes the suction opening and
the device runs at a higher speed.
Switch off the device immediately and
empty the container.
1. To attach the upholstery nozzle or
crevice nozzle to the handle in order
to vacuum up moisture or liquids,
see Chapter Connecting accesso-
ries.
Blowing function
Cleaning of locations that are difficult to
access or where vacuuming is not possi-
ble, e.g. leaf litter from a gravel bed.
1. Push the suction hose into the blow-
er connection until the suction hose
latches into place.
English
9