Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING!
When using power tools, you should
consider basic safety precautions to avoid the risk of
fire, electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start using your power tool.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
in order to ensure your own safety. Always use the booster
pump carefully and responsibly. In using the device, you
accept full responsibility for any accidents caused to third
parties or their goods during its use.
The booster pump may only be used by people who have
read the instruction manual and are familiar with its
handling. Before operating the booster pump for the first
time, users should be instructed by the seller or any other
qualified person on how to use it. Users must ensure they
are instructed adequately and practically.
The instruction manual is considered an integral part of the
booster pump and must always be made available
alongside the appliance.
Familiarize yourself with the control devices and use of the
booster pump. In particular, the user must know how to
quickly stop it.
Do not run the booster pump if you are not both physically
and mentally well. Do not operate it while you are tired or
under the influence of medication, drugs or alcohol. If you
have a health problem, ask your doctor if it is safe for you
to use the booster pump before doing so.
Never allow the booster pump to be used by children,
individuals with limited physical, sensory or mental
abilities, individuals with lack of experience and knowledge
of the appliance, or others unfamiliar with the use
instructions.
Do not operate the pump in aquariums or tanks
where there are fish.
The booster pump may only be used as stated in this
instruction manual. Any other use, which may be
dangerous and may cause injury to the user or damage to
the booster pump, is not permitted.
For safety reasons, any alteration to the booster pump other
than installing accessories specifically authorized by the
manufacturer, is prohibited. The warranty on your water
pump will be voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
The power cord must be plugged into a 230V 50Hz
socket with differential protection.
The circuit breaker must be set to trip when there is a
maximum fault current of 30mA and to allow nominal
currents above 6A.
According to the VDE 0100 standard, the use of water
pumps in swimming pools, ponds and garden
fountains is only permitted with the use of circuit breakers
integrated in the power supply circuit that supply the
pump. If there are people in the pool or in the garden pond,
it is not allowed to use the booster pump.
Protect the sockets from moisture. If there is a risk of
flooding, install the sockets in a location that cannot be
affected by flooding or install properly protected sockets.
Protect the power cord, plug and socket from coming into
contact with heat, oil and sharp objects. If the power cord
is damaged, it must be replaced by a qualified technician.
It must not be repaired.
Ensure the booster pump is only used by individuals who
have familiarized themselves with the instruction manual.
Before running the water pump, replace any faulty, worn
out or damaged parts.
Publicidad
