Beurer BM 67 Manual De Instrucciones página 9

be accepted at the time of measurement. Speak
with your physician about possible causes affect-
ing your blood pressure.
• Do not inflate the cuff unless wrapped around arm.
• Do not touch the unit, the tube and cuff and/or
press any buttons when measurement is in prog-
ress, except for stopping the measurement. Doing
so may cause incorrect readings.
NOTICE:
• The blood pressure monitor is made up of preci-
sion electronic components. Accuracy of readings
and the instrument's service life depend on care-
ful handling. Protect the unit against hard knocks
(e.g. dropping the unit), moisture, water, dirt, dust,
chemicals, extreme hot or cold temperatures, ma-
jor temperature fluctuations, direct exposure to
sunlight and heat sources which are too close
(e.g. stoves, heating radiators). This may damage
the unit. The device must be stored in the speci-
fied ambient conditions. Please see section '10.
Care and Maintenance' and section '12. Specifi-
cations' for details.
• Do not use any aggressive solvents, cleaning
agents, detergents or any other strong chemicals
to clean the device.
• Never immerse and or spill water or any other liquid
onto the monitor or any components, otherwise li-
quid will enter it and cause damage.
• Do not wash the unit in a washing machine, dish
washer or tumble dryer.
• Observe the local regulations for material disposal.
Dispose of the device, components and optional
accessories according to applicable local regula-
tions. Unlawful disposal may cause environment-
al pollution.
• Never attempt to repair, open and/or disassemble
the unit (including cuff and optional accessory) or
adjust it yourself. This may damage the unit and
impair the functions. If you need to have the unit
repaired, please contact our customer service.
Please see warranty for service contact. Before
submitting any complaint, first check the batter-
ies and replace them if necessary.
• Changes or modifications to the device will nullify
the user warranty.
9