Displaying And Deleting Measurements - Beurer BM 67 Manual De Instrucciones

9. Displaying and Deleting Meas-
urements
User Memory:
Every successful measurement is stored along with its
date and time. If there are more than 30 measurements,
the oldest measurement is deleted.
To select a user memory, press the SET button and
then press the +/- buttons until the desired user num-
ber appears on the LCD Display.
Average values
• Press the M button. ' ' flashes on the
display. The average of all saved meas-
urements in the selected user memory
is displayed.
• Press the M button again. ' ' flashes
on the display. The average value of the
morning measurements for the last sev-
en days is displayed (morning: 5:00 AM
– 9:00 AM).
• Press the M button a third time. ' '
flashes on the display. The average val-
ue of the evening measurements for the
last seven days is displayed (evening:
6:00 PM – 8:00 PM).
Individual Measured Values:
• Press the M button again and the last in-
dividual measurement is displayed.
• To shut the device off, press the Start/
Stop button
You can exit the menu at any time by pressing the
Start/Stop button
Clearing Memory:
• When an individual stored measurement is dis-
played, press and hold both the + and - buttons for
five seconds. All values in the selected user mem-
ory will be deleted.
21
.
.
•