Publicidad
Idiomas disponibles
Idiomas disponibles
Transportation and storage
•
For storage and transportation of the product and
fuel, make sure that there are no leaks or fumes.
Sparks or open flames, for example from electrical
devices or boilers, can start a fire.
•
Always use approved containers for storage and
transportation of fuel.
•
Empty the fuel and chain oil tanks before
transportation or before long-term storage. Discard
the fuel and chain oil at an applicable disposal
location.
•
Use the transportation guard on the product to
prevent injuries or damage to the product. A saw
chain that does not move can also cause serious
injuries.
•
Remove the spark plug cap from the spark plug and
engage the chain brake.
•
Attach the product safely during transportation.
Technical data
Engine
Cylinder displacement, cm
Idle speed, rpm
Maximum engine power acc. to ISO 7293, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, US Pint/cm
Oil tank capacity, US Pint/cm
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/number of teeth
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
1679 - 005 - 02.11.2022
Transportation and storage
Technical data
3
3
3
To prepare your product for long-term
storage
1. Stop the product and let it become cool before you
disassemble it.
2. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION:
guide bar are not cleaned, they can
become rigid or blocked.
3. Attach the transportation guard.
4. Clean the product. Refer to
on page 22 for instructions.
5. Do a complete servicing of the product.
Husqvarna 540XP Mark III
39.1
3000
1.9/2.6 @ 10500
NGK CMR7H
0.65
0.78/370
0.49/230
Adjustable
9.1/4.1
Spur/6, Spur/7
If the saw chain and
Maintenance schedule
35
Publicidad
