Publicidad
Idiomas disponibles
Idiomas disponibles
13. Starter rope handle
14. Starter housing
15. Chain oil tank
16. Muffler and sprark arrester screen
17. Chain brake and front hand guard
18. Front handle
19. Right hand guard
20. Clutch cover
21. Clutch drum
22. Oil pump adjustment screw
23. Chain tensioning screw
24. Chain catcher
25. Spiked bumper
26. Saw chain
27. Guide bar
28. Bar tip sprocket
29. Brake band
30. Guide bar cover
31. Operator's manual
32. Combination wrench
33. Bar nut
34. Product and serial number plate
Symbols on the product
Stop.
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
4
Do not let the guide bar tip touch an
object.
Warning! Kickback can occur when the
guide bar tip touches an object. A
kickback causes a lightning fast reverse
reaction that throws the guide bar up and
in the direction of the operator. Can cause
serious injury.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Air purge.
Adjustment of the oil pump.
Fuel.
Chain oil.
yyyywwxxxx
Husqvarna S93G
Max 9T
XX
Computed kickback bar stopping angle
without actuated chainbrake, CKA wob.
XX
Computed kickback bar stopping angle
with actuated chainbrake, CKA wb.
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
Recommended cutting
equipment in this exam-
ple: Guide bar length 14
in, maximum nose radius
9 Teeth and chain type
Husqvarna S93G.
1679 - 005 - 02.11.2022
Publicidad
