Skil SD561802 Manual Del Propietário página 23

LED Worklight (Fig . 5)
Your tool is equipped with an
LED worklight, which illuminates
when the trigger is squeezed.
This provides additional light on
the surface of the work piece for
operation in lower-light areas.
The LED worklight will
automatically turn on when the
trigger switch is depressed, and
turn off after the trigger switch is released.
Two Handle Positions
(Fig . 6)
Your tool features two handle
positions for convenience in
various operations.
a. Depress the pivot-unlock knob
and twist the handle to alternate
between the two handle
positions.
b. Release the pivot-unlock knob
and check to make sure that the handle is locked in place.
NOTICE: Do not over-twist the handle.
Fig. 5
Fig. 6
23