Edesa EZH-3011 /A Manual De Instrucciones página 22

2.5 Start
(The above are for reference only, and the actual configuration shall be subject to the actual purchase
or the seller's statement)
2.6 Energy saving tips
● The appliance should
appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This
cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as
many items as needed at one time, and close the door as soon as possible.
● Taking a
position in the figure and gently pry it outward to open the flip.
● After opening,
line from the hole;
● After removing the
● After
connecting to the power supply, otherwise it may cause performance
degradation or damage to the freezer.
Before storing fresh or frozen food in the freezer, run the freezer for 2 to
3 hours; in hot summer days, users should run the freezer for 4 hours in
advance.
During the power cut or cleaning, users should pull the plug off and plug in
again after a 5-minute interval in case the continuous start damage the
compressor.
be located
tool (flat screwdriver
the freezer is
power line,
transportation, please
in the
19
or
as shown
cover the
let the
coolest area of
cone),
in
cover
freezer