Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Scaffold hook
24. Nose
25. Frame
26. Spine
27. Gate
28. Locking Lever
29. Rope Eye
30. Rivet Pins
31. Gate Opening
Fig. II
a.
Anchorage
b. Length of connector
c.
Length of elongation
d. User height
e.
Safety distance
f.
Obstacle / floor
g. Clearance
Intended Use (Fig. I)
Harness
This harness is designed for use in a restraint positioning system, where, used in combination with
a suitable lanyard, connectors and anchorage, it prevents the user from entering an area where they
may fall. May also be used for fall arrest when used with an appropriate shock absorber.
Fixed Length Restraint Positioning Lanyard
This lanyard is used to connect to a suitable anchorage as part of a work positioning or restraint
system.
WARNING: Do not use this lanyard for fall arrest without a shock absorber.
Screwgate karabiner
This karabiner is used as a connector in height safety systems. It may be used to connect
components including anchorages, for fall arrest, work positioning, travel restriction, rescue,
retrieval, evacuation and confined space entry/exit operations, depending on the associated system
components used.
Scaffold hook
This scaffold hook is used as a connector to anchorages in height safety systems. It may be used for
fall arrest, work positioning and travel restriction, depending on the associated system components
used.
Note: For non-commercial use only (applies to system and all components).
Usage Limitations
WARNING: Do not use a work positioning or restraint belt if there is a risk of becoming
suspended or exposed to unintended tension by the belt.
WARNING: Height safety gear is designed to arrest a fall from height ONLY ONCE! If subjected
to an arrested fall, the gear must be withdrawn from service and rendered unusable.
• Manual-locking or self-closing gates should only be used where the user does not have to attach
and remove the connector frequently, i.e. many times during a working day.
10
• This equipment is designed for use by one person with a combined total weight no greater than
140kg, including clothing, tools, and other user-borne objects
• Use extreme CAUTION when working near energised electrical sources. Metal hardware conducts
electric current. Maintain a safe working distance (at least 3m) from all electrical hazards.
• A full body harness is the only acceptable body holding device that can be used in a fall arrest
system.
• Never exceed a total sub-system length of 2m with an energy absorber, including lanyard,
terminations and connectors.
• Never use a lanyard for fall arrest purposes without an energy absorber.
• Always minimise the amount of slack in the lanyard near a fall hazard.
• Always move to an area where there is no fall hazard to adjust the lanyard length.
• Never clip the free tail of a twin lanyard combined with an energy absorber back on the harness.
• Never use separate lanyards each with energy absorbers parallel to each other in a fall arrest
system. Otherwise, they may become entangled and prevent the Energy Absorbers from
functioning.
Take the limitations of the materials from which this equipment is made into account in use and
when maintaining and storing:
• Equipment must be shielded when used near welding, metal cutting, or other activities that
produce large amounts of heat
• Do not use in environments with temperatures lower than -40°C / -40°F or greater than 80°C /
176°F
• The strength, durability and functionality of hardware (buckles, linkages etc.) and connectors
(karabiners, scaffold hooks etc.) are affected by factors including the following:
o Contamination with substances such as acids, alkali, food and drink (such as milk, wine and
vinegar) and water (especially salt water)
o Temperature extremes
• Acidic, alkaline, or other environments with harsh substances may damage hardware (buckles,
linkages etc.) and connectors (karabiners, scaffold hooks etc.). Organic substances and salt water
are particularly corrosive to metal parts
• The strength of synthetic fibres used in height safety equipment (e.g., the webbing used in a fall
arrest harness) is affected by factors including the following:
o Ingress of dirt, grit and other abrasives
o Mechanical damage (e.g. friction during use)
o Chemical contamination with substances such as acids, alkali, oils and seawater
o UV-radiation from sources including sunlight
o Temperature extremes
• Height safety equipment containing synthetic fibres are subject to a mandatory obsolescence
period. Please see the 'Disposal' section for more information
Take steps to reduce exposure to situations that may compromise the strength of the equipment.
Always follow guidance for maintenance, storage and transportation. Steps may include the
following:
• Avoiding contact with rough, abrasive surface, sharp edges, cutting tools etc.
• Avoiding contact with chemicals known to cause weakening of the materials
• Following proper cleaning and maintenance processes
• Avoiding working with this equipment in wet weather
• Avoiding working with this equipment when it is very hot and sunny, or very cold
Note: Different materials have different resistances and vulnerabilities. Ensure a specific risk-
reduction approach is adopted for each system relevant to the materials and system set-up.
Equipment must receive regular inspections (see 'Inspection procedure'). If damage is suspected,
remove the equipment from service and render unusable (see 'Disposal').
Unpacking your Product
• Carefully unpack and inspect your product. Fully familiarise yourself with all its features and
functions.
• Ensure all parts of the product are present and in good condition. If any parts are missing or
damaged, have such parts replaced before attempting to use this product.
Before Use
Pre-use checks
• A visual and tactile (i.e. by sense of touch) inspection must be carried out before every use. All
parts of the gear must be inspected in an area with appropriate light conditions.
1. Slowly pass webbing, belt or rope through your hands to detect small cuts of 1mm or more in
material edges, abrasions and twist damage. Feel for softening and hardening of fibres and look
for ingress of contaminants
2. Inspect all stitching for visual damage.
3. Check all hardware and connectors for damage and confirm functionality.
Publicidad
