1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment and success.
Note:
In accordance with the applicable product liability laws, the manufacturer of this product assumes
no liability for damage to the product or caused by the product arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before assembly and commissioning.
This operating manual should help you to familiarise yourself with your product and to use it for
its intended purpose.
The operating manual includes important instructions for the safe, proper and economic opera-
tion of the product, for avoiding danger, for minimising repair costs and downtimes and for in-
creasing the reliability and extending the service life of the product.
In addition to the safety instructions in this operating manual, you must also observe the regula-
tions applicable to the operation of the product in your country.
Keep the operating manual package with the power tool at all times and store it in a plastic cover
to protect it from dirt and moisture. They must be read and carefully observed by all operating
personnel before starting the work.
The product may only be used by personnel who have been trained to use it and who have been
instructed with respect to the associated hazards.
In addition to the safety instructions in this operating manual and the separate regulations of your
country, the generally recognised technical rules relating to the operation of such products must
also be observed.
We accept no liability for accidents or damage that occur due to a failure to observe this manual
and the safety instructions.
2
Product description (fig. 1)
1.
On/off switch
2.
Speed control
3.
Battery mount
4.
Suction adapter
5.
Sanding wheel
28 | GB
www.scheppach.com