Publicidad
Idiomas disponibles
Idiomas disponibles
8.1.2
Taking off the suction adapter and dust bag
1.
Take off the suction adapter (4) from the suction connection (11) with the dust bag (7) at-
tached.
8.1.3
Emptying the dust bag
1.
Remove the dust bag (7) from the suction adapter (4) and empty the dust bag (7).
2.
Slide the dust bag (7) onto the suction adapter (4) as far as it will go.
3.
Ensure that the dust bag (7) is correctly attached to the suction adapter (4).
8.2
Connecting/taking off the external dust extraction unit
8.2.1
Connecting external dust extraction unit (Fig. 3)
1.
Remove the dust bag (7) from the suction adapter (4).
2.
Connect an approved dust extraction unit (not included in the scope of delivery) to the suc-
tion adapter (4).
8.2.2
Taking off the external dust extraction unit
1.
Take off the vacuum hose of the approved dust extraction unit (not included in the scope of
delivery) from the suction adapter (4).
8.3
Inserting/removing the battery (10) in the battery mount (3)
(Fig. 2)
Inserting the battery
1.
Push the battery (10) into the battery mount (3). The battery (10) clicks into place audibly.
Removing the battery
1.
Press the unlock button (9) of the battery (10) and remove it from the battery mount (3).
9
Operation
WARNING
Danger of injury!
Remove the battery from the power tool before carrying out any work on the power tool (e.g.
maintenance, tool change, etc.) and when transporting and storing it. There is a risk of injury if
the on/off switch is operated unintentionally.
ATTENTION
Make sure that the ambient temperature does not exceed 50°C and does not fall below -20°C
during work.
www.scheppach.com
GB | 37
Publicidad
