Publicidad
Idiomas disponibles
Idiomas disponibles
Resonant circuit
Weight (without battery)
Subject to technical changes!
Noise and vibration
WARNING
Noise can have serious effects on your health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection for you and persons in the vicinity.
The noise and vibration values have been determined in accordance with EN 62841-1.
Noise data
Sound pressure L
pA
Measurement uncertainty K
Sound pressure L
wA
Measurement uncertainty K
Vibration parameters
Vibration a
h
Measurement uncertainty K
The total vibration emission values specified and the device emissions values specified have
been measured in accordance with a standardised test procedure and can be used for compari-
son of one electric tool with another.
The total noise emission values specified and the total vibration emission values specified can al-
so be used for an initial estimation of the load.
WARNING
The noise emission values and vibration emission value can vary from the
specified values during the actual use of the power tool, depending on the
type and the manner in which the electric tool is used, and in particular the
type of workpiece being processed.
Try to keep the stress as low as possible. For example: Limit working time. In doing so, all
parts of the operating cycle must be taken into account (such as times in which the power tool
is switched off or times in which it is switched on, but is not running under a load).
pA
wA
www.scheppach.com
2 mm
1 kg
75.0 dB
3 dB
83.0 dB
3 dB
2
9.353 m/s
2
1.5 m/s
GB | 35
Publicidad
