Publicidad
Idiomas disponibles
Idiomas disponibles
• Ensure that the contact pressure is even. Excessively increasing the contact pressure does
not lead to a higher sanding rate, but to greater wear on the sanding sheets.
• Do not use a sanding sheet with which metal has been machined for other materials.
• Empty the dust bags or the hoover in good time to ensure optimum suction performance.
11 Cleaning and maintenance
WARNING
Have maintenance and repair tasks that are not described in this operating
manual, carried out by a specialist workshop. Use only original spare parts.
There is a risk of accident! Always perform maintenance and cleaning work
with the battery removed. There is a danger of injury! Let the Product cool
down before all maintenance and cleaning tasks. Elements of the engine
are hot. There is a danger of injury and burning!
The product can start unexpectedly and cause injuries.
–
Remove the battery.
–
Allow the product to cool down.
–
Remove the tool attachment.
11.1 Cleaning
1.
Keep protective devices, air vents and the motor housing as free of dust and dirt as possible.
Rub the product clean with a clean cloth or blow it off with compressed air at low pressure.
We recommend that you clean the product directly after every use.
2.
Ventilation openings must always be free.
3.
Do not use any cleaning products or solvents; they could attack the plastic parts of the prod-
uct. Make sure that no water can penetrate the product interior.
4.
Clean the sanding sheet with a hoover or tap it out.
11.2 Maintenance
The product is maintenance-free.
12 Storage
Preparation for storage
1.
Remove the battery.
2.
Clean and check the product for damage.
40 | GB
www.scheppach.com
Publicidad
