Publicidad
Idiomas disponibles
Idiomas disponibles
h) Do not let familiarity gained from frequent use of tools allow you to become compla-
cent and ignore tool safety principles. A careless action can cause severe injury within a
fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The cor-
rect power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or remove the battery pack, if detach-
able, from the power tool before making any adjustments, changing accessories, or
storing power tools. Such precautionary measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and attachments. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power tool's oper-
ation. If damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use electric tools, insertion tools, etc. according to these instructions. Take into ac-
count the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in unex-
pected situations.
5) Service
a) Only have your power tool repaired by qualified specialists and only with original
spare parts. This will ensure that the safety of the power tool is maintained.
Using and handling the rechargeable tool
a) Only charge the batteries with battery chargers recommended by the manufacturer. A
battery charger that is suitable for a particular type of battery poses a fire hazard when used
with other batteries.
b) Only use the batteries in power tools that are designed for them. The use of other bat-
teries can lead to injuries and a risk of fire.
c)
Keep the unused battery away from paper clips, coins, keys, nails, screws or other
small metal objects that could cause a short-circuit between the contacts. A short-cir-
cuit between the contacts of the battery could result in burns or fires.
d) Liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of
accidental contact, rinse with water. If the liquid gets into your eyes, seek additional
medical attention. Leaking battery fluid may cause skin irritation or burns.
32 | GB
www.scheppach.com
Publicidad
