Publicidad
Step 22
å
If you purchased the 422984 Credenza, open the
box, locate the 422984 Credenza TOP (V) and lay
it on packing foam or magazines flat on the floor.
å
With a drill and 3/16" drill bit, finish drilling through
the four holes shown.
Drill through these
two small holes.
å
If you purchased the 422982 L-Desk, open the
box, locate the TOP (X) and RETURN TOP (Y)
and lay them on packing foam or magazines
flat on the floor as shown.
å
With a drill and 3/16" drill bit, finish drilling
through the four holes shown based on your
Diagram 1 or 2 preference in Step 21.
Drill through these two
small holes for Diagram 2
configuration.
Drill through these two
small holes for Diagram 1
configuration.
Page 26
Drill through these two
small holes for Diagram 1
configuration.
These eight
holes must
be here.
422983
CAUTION
Make sure you have
packing foam or
throw away material
underneath the tops
near the drill area.
Drill through these
two small holes.
CAUTION
Make sure you have
packing foam or
throw away material
underneath the tops
near the drill area.
Drill through these two
small holes for Diagram 2
configuration.
www.sauder.com/service
Publicidad
