GB
MT
subject to normal wear and may therefore
be considered as wearing parts (e.g. ad-
apter nozzle) or to cover damage to break-
able parts (e.g. switches).
This guarantee shall be invalid if the prod-
uct has been damaged, used incorrectly or
not maintained. Precise adherence to all of
the instructions specified in the operating
manual is required for proper use of the
product. Intended uses and actions against
which the operating manual advises or
warns must be categorically avoided.
The product is designed only for private and
not commercial use. The guarantee will be
invalidated in case of misuse or improper han-
dling, use of force, or interventions not under-
taken by our authorised service branch.
Processing in Case of Guarantee
To ensure quick handling of you issue,
please follow the following directions:
• Please have the receipt and identifica-
tion number (IAN 425524_2301) ready
as proof of purchase for all enquiries.
• Please find the item number on the rat-
ing plate.
• Should functional errors or other de-
fects occur, please initially contact the
service department specified below by
telephone or by e-mail. You will then re-
ceive further information on the process-
ing of your complaint.
• After consultation with our customer
service, a product recorded as defective
can be sent postage paid to the service
address communicated to you, with the
proof of purchase (receipt) and specifi-
cation of what constitutes the defect and
when it occurred. In order to avoid ac-
ceptance problems and additional costs,
please be sure to use only the address
communicated to you. Ensure that the
consignment is not sent carriage forward
or by bulky goods, express or other spe-
22
cial freight. Please send the equipment
inc. all accessories supplied at the time
of purchase and ensure adequate, safe
transport packaging.
Repair Service
For a charge, repairs not covered by the
guarantee can be carried out by our ser-
vice branch, which will be happy to issue
a cost estimate for you. We can handle
only equipment that has been sent with ad-
equate packaging and postage.
Attention: Please send your equipment to our
service branch in clean condition and with
an indication of the defect. Equipment sent
carriage forward or by bulky goods, express
or other special freight will not be accepted.
We will dispose of your defective devices
free of charge when you send them to us.
Service-Center
Service Great Britain
GB
Tel.: 0800 4047 657
E-Mail: grizzly@lidl.co.uk
IAn 425524_2301
Service Malta
MT
Tel.: 800 622 30
E-Mail: grizzly@lidl.com.mt
IAn 425524_2301
Importer
Please note that the following address is
not a service address. Please initially con-
tact the service centre specified above.
Grizzly Tools GmbH & co. KG
Stockstädter Straße 20
DE-63762 Großostheim
Germany
www.grizzlytools.de