Functional Description; Name Of Parts; Specifications - Metabo HPT GP 3V Instrucciones De Seguridad Y Manual De Instrucciones

NOTE
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance
of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have fi rst read and understood all safey instructions
contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that diff er from those on your own power
tool.

NAME OF PARTS

Collet chuck
Spindle

SPECIFICATIONS

Model
Motor
Power Source
Current
No-Load Speed
Rated Speed
Max. Wheel Diam.
Collet Chuck Capacity
Weight (without cord)
WARNING
NEVER use an abrasive wheel, cutting wheel, or any wheel greater than 1" in diameter for GP3V and 2" in
diameter for GP5V. Using such wheels can result in wheel breakage, and will otherwise increase the risk of
bodily injury from contact with the wheel or wheel fragments.

FUNCTIONAL DESCRIPTION

Bearing lid (B)
Nose bracket
7,000 - 29,000 / min
Switch
Side handle
Fig. 1
GP3V
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
6.7 A
30,800 / min
1" (25 mm)
1/4" (6.35 mm)
4.0 lbs (1.8 kg)
Tail cover
Housing
GP3V
GP5V
2,000 - 8,300 / min
8,820 / min
2" (50 mm)
1/4" (6.35 mm)
4.2 lbs (1.9 kg)
English
9