Cleaning And Maintenance - Bimar HR309 Manual De Instrucciones

To direct
-
convenient way, adjust the angle of brackets
using the two screws (image on the right)
To disable the device press the "
and unplug the appliance from the mains.
For long periods of non-use, remove the plug from the socket

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, switch it off, remove the plug from the
current socket and leave it until getting cool.
 Protect the radiant part from dust to preserve its reflectivity.
 To clean the base, use a slightly damp, soft cloth; do not use scouring pads or
abrasive products.
 To clean the radiant part, use a slightly damp, soft cloth; do not use metal scouring
pads or abrasive products, water or other liquids; do not immerse in water or other
liquids.
 The halogen heater must be substituted with a special tool: please contact a
competent qualified electrician.
 If you decide not to use the appliance any more, we recommend making it
inoperative by cutting the power cord (after making sure you have
disconnected the plug from the socket) and make dangerous parts harmless if
children are allowed to play with them.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or
to a dealer providing this service. Disposing of a household appliance separately
avoids possible negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a crossed-out
wheeled dustbin.
radiation heat in the most
"button, then turn the switch to 0 position
18