Medion LIFE P13242 Manual De Operación página 191

ANALOGUE MANUAL SCAN (only antenna
reception type)
Use this to start a manual search for analogue
channels. Enter the START FREQUENCY
and then select SCAN UP or SCAN DOWN.
When a station is found, the search is complet-
ed and the station is stored in the station list.
SINGLE RF SCAN
Select an RF channel using the direction but-
tons . The SIGNAL LEVEL and the SIG
NAL QUALITY of the selected channel are
displayed. Press O K to start scanning on the
selected RF channel. The stations found are
stored in the station list.
MANUAL SERVICE UPDATE
Start a service update manually.
LCN
Logical Channel Numbering: Select the ON
setting if you want to sort the channels based
on a preset channel list (if available from the
channel supplier).
CHANNEL SCAN TYPE
Decide which channels you want to search for:
ONLY FREE CHANNELS, ONLY ENCRYPT
ED CHANNELS or ALL (free and encrypted
channels).
CHANNEL STORE TYPE
Select the channel memory type here.
ALL: Search for digital TV channels and digital
radio stations.
ONLY DIGITAL CHANNELS: Search for digi-
tal TV channels.
ONLY RADIO CHANNELS: Search for digital
radio stations.
FAVOURITE NETWORK SELECT
Select your favourite network here. This option
is active if more than one network is available.
CHANNEL SKIP
Set channels to be skipped when switching
the channels on the remote control. Select the
appropriate channels and press O K to high-
light them.
CHANNEL SWAP
Open the channel change list here.
This option takes you to the
programme at the top of the
PAGE UP
displayed page. When this
(red but-
button is pressed again, you
ton)
move up through the chan-
nel list in steps of 11.
This option takes you to the
PAGE
programme at the bottom
DOWN of the displayed page. When
(green but- this button is pressed again,
ton) you move down through the
channel list in steps of 11.
GO TO
Enter the channel number
CHANNEL
that you wish to call up into
(yellow
the text field.
button)
EXIT
Close the channel change
(blue but-
list.
ton)
CHANNEL MOVE
Move a channel to the position of another
channel. Highlight the channel you want to
move and press OK to select. Highlight the
second channel in the same way. When the
second channel is selected, the first selected
channel is moved to the position of that chan-
nel. The blue button (GO TO CHANNEL)
calls up an input screen where you can enter a
channel number to go to it quickly.
CHANNEL EDIT
Here you can edit channels in the channel
list. Edit the name and channel number of the
selected channel and, if available, call up infor-
mation on the network name, frequency, col-
our system and sound system for this channel.
Other options can also be edited depending
on the channel. Press the blue button to de-
lete the highlighted channel.
CHANNEL DELETE
You can delete individual channels here.
ANALOGUE CHANNEL FINETUNE
Here you can fine-tune analogue channels.
CLEAR CHANNEL LIST
(only cable reception type)
You can use this option to delete the contents
of the channel list.
SATELLITE
SATELLITE RESCAN
Select this option to start a satellite search. If
the Satellite option is selected, some search
configurations are not available. Therefore, the
settings you made during the initial installa-
tion may not be changed. After selecting this
option, select the satellite to be searched and
press O K .
NEXT
SATELLITE
Activate/deactivate the sat-
STATUS
ellite status
SATELLITE
Displays the name of the
SELEC
satellite
TION
Select the desired scan
SCANMOE
mode.
SCAN
Select the desired scan type.
TYPE
EN
21