Medion LIFE P13242 Manual De Operación página 194

– INPUTS
All inputs of the TV can be shown or hidden
here. You can also rename each input by se-
lecting one of the predefined names or by
assigning a name.
HDMI CONTROL
Enable this function to allow all devices that
are connected via HDMI to communicate with
each other. In this way, you can, for example,
control the basic functions of all devices in an
HDMI network using only one remote control.
Activate this function if you want to configure
additional settings under SETTINGS > DE
VICE PREFERENCES > SOUND > EARC.
First select HDMI CONTROL and select HDMI
input as the source. If you have already con-
nected a CEC-enabled device, the name of
the device is listed instead of HDMI. The basic
functions of the device can then be automat-
ically controlled using the remote control of
the Smart TV.
DEVICE AUTO POWER OFF
Activate this function if you want all HDMI de-
vices to switch off together with the TV set.
TV AUTO POWER ON
Activate this function if you want the TV set to
switch on together with the HDMI devices.
HDMI EDID VERSION
Displays the HDMI EDID version
CEC DEVICE LIST
CEC-enabled devices that are connected to the
TV via a HDMI port will be listed here.
– POWER
These settings can also be made in the POW
ER menu.
The following energy saving options are avail-
able:
SLEEP TIMER
Define an idle time after which you want your
TV to enter sleep mode automatically.
PICTURE OFF
Here you can switch off the screen. Select this
option and press O K . If you now press O K
again when the screen is black, the picture dis-
play is activated again.
NO SIGNAL AUTO POWER OFF
Define a time after which you want your TV
to turn itself off if it does not receive an input
signal.
AUTO SLEEP
Select the settings for the automatic sleep
mode here.
24
– PICTURE
Depending on the input source selected,
some menu options may not be available.
PICTURE MODE
Select picture mode: USER, STANDARD, VI
VID, SPORT, MOVIE, GAME
When changing the setting, a message may
occasionally appear stating that the energy
consumption could increase as a result. You
then have the option of cancelling or confirm-
ing with OK.
AUTO BACKLIGHT
Select a value for the backlighting: OFF, LOW,
MIDDLE, ECO. When OFF is selected, you
can make an individual setting under BACK
LIGHT.
BRIGHTNESS
Increase or reduce brightness (on a scale of 0
to 100)
CONTRAST
Increase or reduce contrast (on a scale of 0 to
100)
COLOUR
Increase or reduce saturation (on a scale of 0
to 100)
HUE
Increase or reduce colour tone (on a scale of
-50 to 50)
SHARPNESS
Increase or reduce sharpness (on a scale of 0
to 100)
GAMMA
Select the gamma setting: DUNKEL, MITTEL,
HELL
COLOUR TEMPERATURE
Select colour tone: NUTZER, KÜHL, STAND
ARD, WARM. You can also individually adjust
the red, green and blue tones.
DISPLAY MODE
Select the desired display mode.
ADVANCED VIDEO
The following options are available here:
The dynamic noise reduction
function reduces picture
noise and improves picture
DNR quality when the analogue
signal is weak. Select be-
tween OFF, LOW, MEDI
UM, STRONG and AUTO.