Publicidad
Idiomas disponibles
Idiomas disponibles
Special
function:
potatoes)
1. Put the potatoes (approx. 500g) with some
water in a heat resistant container and
place it on the rotating plate in the
microwave.
2. Press the PROGRAM KEY «P» (1). Select
the «AUTO 1» function by turning the
ROTATING KNOB (8) in any direction.
Confirm the function by pressing the
PROGRAM KEY «P» (1) again.
3. Press the START key (4). The microwave
starts to function and the screen displays
the remaining operating time.
Special function: Auto 2 (slow boiled /
stewed dishes)
1.
Place
the
ingredients
boiled/stewed (e.g. cabbage, chicken
stew) in a bowl, cover the bowl and place
on the oven‟s tray.
2. Press the PROGRAM KEY «P» (1). Select
the «AUTO 2» function by turning the
ROTATING KNOB (8) in any direction.
Confirm the function by pressing the
PROGRAM KEY «P» (1) again.
3. Press the START key (4). The microwave
starts to function and the screen displays
the remaining operating time.
16
Auto1
(cook
500g
to
be
slow
4. Turn the foods around at the moment the
microwave beeps and starts to flash on
TURN
the screen: «
again and press the START key (4).
Special function: Auto 3 (mashed potato)
1. Prepare the mashed potato using 1 kg of
raw potatoes. Place the mashed potato
in a suitable container (25-26 cm in
diameter) and then place it on the micro-
oven tray.
2. Press the PROGRAM KEY «P» (1). Select
the «AUTO 3» function by turning the
ROTATING KNOB (8) in any direction.
Confirm the function by pressing the
PROGRAM KEY «P» (1) again.
3. Press the START key (4). The microwave
starts to function and the screen displays
the remaining operating time.
Memory Function
MEM
The «
» function allows a range of
frequently used parameters (time and power)
to be stored in the memory. Nevertheless,
you may only use it with the main functions:
Microwave, Grill and Microwave + Grill.
Memory storage procedure
1. Press the PROGRAM KEY «P» (1). Select
the desired function (eg. MICROWAVE)
by turning the ROTATING KNOB (8) in
any direction. Confirm the function by
pressing the PROGRAM KEY «P» (1)
again.
2. Set the desired parameters (duration and
power)
as
described
functions.
3. Press the PROGRAM KEY «P» (1) until
you hear a beep and the DISPLAY (7)
displays the word «MEM».
Memory use procedure
1. Press the PROGRAM KEY «P» (1). Select
the «MEM» function by turning the
ROTATING KNOB (8) in any direction.
Confirm the function by pressing the
PROGRAM KEY «P» (1) again.
». Close the door
in
the
basic
Publicidad
