Teka ML 8200 BIS Manual Del Usuario página 8


The door contact surfaces (the front of the cavity and the
inside part of the doors) must be kept very clean in order to
ensure the oven functions correctly.

Please follow the instructions regarding cleaning in the
section "Oven Cleaning and Maintenance".

WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
Please refer to the chapter "CHANGING THE OVEN LIGHT
BULB".
Service and Repair

WARNING! Cut the power supply before repair.

WARNING! Only a competent person can carry out any
service or repair operation that involves the removal of a
cover
microwave energy.

WARNING! If the door or door seals are damaged, the
appliance must not be operated until it has been repaired
by a competent person.

If the power cable is damaged it should be substituted by
the manufacturer,
qualified for this task in order to avoid dangerous situations.

Repair and maintenance work, especially of current
carrying parts, can only be carried out by technicians
authorized by the manufacturer.
Avoid damaging the oven or other dangerous situations by
following these instructions

Never switch on the microwave when it is empty. If there is
no food inside there may be an electrical overcharge and
the oven could be damaged. RISK OF DAMAGE!
8
which gives protection
authorized
against exposure
agents or
to
technicians