Selecting the Sound Modes
You can select one of the preset Sound Modes.
SEA Modes
SOUND
ROCK
POP
MODE
STADIUM
HALL
Surround Modes*
SEA (Sound Effect Amplifier) Modes
ROCK
Boosts low and high frequency. Good for
acoustic music (initial setting).
POP
Good for vocal music.
CLASSIC
Good for classical music.
User Modes
USER 1/2/3
Your individual mode stored in memory.
See the next column "Creating Your Own
Sound Modes—User Mode."
Multi Mode
MULTI
Outputs the same sound from the
surround speakers as the sound output
from the main speakers.
Surround Modes*
DANCE
Increases resonance and bass.
HALL
Adds depth and brilliance to the sound.
STADIUM
Adds clarity and spreads the sound, as in
an outdoor stadium.
* Surround elements are added to the SEA elements to create
being-there feeling in your room.
To cancel the Sound Mode, select "OFF."
CLASSIC
OFF
DANCE MULTI
Creating Your Own Sound
Modes—User Mode
You can adjust the preset Sound Modes to create your own
Sound Modes which suit your taste. The changed settings can
be stored as the USER 1, USER 2 and USER 3 Modes.
• If you want to add surround elements into your Sound
Mode, select one of the Surround Modes to adjust.
While "USER 1," "USER 2," or "USER 3" is shown on the
display...
1
Enter the SEA Control Mode.
SET
2
SET
3
Adjust the SEA pattern.
1 Adjust BASS.
2 Adjust TREBLE.
L
BALANCE
R
• You can adjust the bass and treble level from –3 to
+3.
4
Select one of the User Modes.
L
BALANCE
R
5
Store the setting.
SET
• The Sound Mode changes to the one you have stored.
Remote
INFO
ONLY
SET
USER 1
USER 2
USER 3
13