JVC DX-T5 Manual De Instrucciones página 6

Playable Disc Types
DIGITAL VIDEO
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
• CD-R/-RW: Recorded in the Audio CD/Video CD/
SVCD formats and MP3/WMA/JPEG files.
• DVD-R: Recorded in the DVD Video format.
• DVD-RW: Recorded in the DVD Video format or the
Video Recording (DVD-VR) format.
• DVD-RAM: Recorded in the Video Recording (DVD-
VR) format.
In addition to the above discs, this system can play back
audio data recorded on CD Text, CD-G (CD Graphics), and
CD-Extra.
• The following discs cannot be played back:
DVD+R, DVD+RW, CD-I (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage
the speakers.
• In this manual, "file" and "track" are interchangeably used
for MP3/WMA/JPEG operations.
Caution for DualDisc playback:
The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
About color system
This System accommodates both NTSC and PAL system
and can play back discs recorded with either system.
To change the color system, see page 14.
Note on Region Code
This System can play back only DVD Videos whose Region
Code numbers include "4."
EX.:
Audio formats
The System can play back the following digital audio
formats.
• LPCM (Linear PCM),
DTS (Digital Theater Systems), MLP (Meridian Lossless
Packing)
2
INFO
DIGITAL (Dolby Digital),
When playing a multi-channel encoded DVDs, the System
properly converts these multi-channel signals into 2
channels, and emits the downmixed sound from the main
speakers and matrix surround speakers.
• To enjoy the powerful sound of these multi-channel
encoded DVDs, connect a proper decoder or an amplifier
with a proper built-in decoder to the OPTICAL DIGITAL
OUTPUT terminal on the rear.
IMPORTANT: Before playing a disc, make sure of
the following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays.
• For disc playback, you can change the initial setting to
your preference. See "Setup Menu Operations" on
page 36.
If " " appears on the TV screen when you press a
button, the disc cannot accept the operation you have
tried to do.
How to Read This Manual
• Button and control operations are explained as listed in the
table below.
• Some related tips and notes are explained later in the
sections "Learning More about This System" and
"Troubleshooting," but not in the same section
explaining the operations (
content has some information).
Indicates that you press the button briefly.
Indicates that you press the button briefly and
repeatedly until an option you want is
selected.
Indicates that you press one of the buttons.
Indicates that you press and hold the button
2
sec.
for a specified period.
The number inside the arrow indicates the
period of press (in the example, 2 seconds).
Indicates that you turn the control toward the
specified direction(s).
Indicates that this operation is only
Remote
ONLY
possible using the remote control.
Indicates that this operation is only
possible using the main unit.
Main Unit
ONLY
indicates that the
INFO