Descargar Imprimir esta página

Parkside PLG 20 C3 Traducción De Instrucciones Originales página 23

Ocultar thumbs Ver también para PLG 20 C3:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
play with the equipment.
•­The­charger­may­only­
be used to charge
batteries of the Parkside
X­20­V­Team­series.­
Charging other batter-
ies can lead to a risk of
fire and explosion.
• Do not use the charger
if defective and do not
open­it­yourself.­Be-
fore each use, check
the charger, cable and
plug.­Only­have­quali-
fied­personnel­repair­
a defective device and
only­use­original­spare­
parts. This prevents haz-
ards and maintains the
safety of the device.
• Connect the charger
only­to­a­socket­with­an­
earth. Ensure that the
mains voltage matches
the­specifications­on­the­
charger rating plate.
Risk of electric shock.
• Keep the charger clean
and­away­from­wet­
and rain. Do not use the
charger outdoors. Dirt
and the entry of water
increase the risk of elec-
tric shock.
• Avoid mechanical dam-
age to the charger. This
can result in internal
short circuits.
•­The­charger­must­not­
be operated on or near
flammable­surfaces­
(e.g.­paper,­textiles).­
Risk of fire due to heat-
ing during charging.
• If the power cable
for this equipment is
damaged, it must be
replaced­by­the­manu-
facturer, a customer ser-
vice agent of the same
or­a­similarly­qualified­
person in order to pre-
vent hazards.
• Do not use the charger
to charge non-recharge-
able batteries.
• To­reduce­the­electric­
shock hazard, unplug
the­battery­charger­
from the mains before
cleaning the charger.
•­Do­not­use­any­acces-
GB
MT
23

Publicidad

loading