Parkside PLG 20 C3 Traducción De Instrucciones Originales página 24

GB MT
sories that are not rec-
ommended­by­PARK-
SIDE. This can result in
electric shock or fire.
Charging Process
Do not expose the
battery to extreme
conditions such as heat or
impact. Risk of injury
from escaping electrolytic
solution! After eye/skin
contact, rinse the affected
areas with water or a
neutraliser and consult a
doctor.
Charge the battery
in a dry room only.
Prior to attaching the
charger, check that the bat-
tery's outer surface is clean
and dry. There is a risk of
injury due to electric shock.
To recharge batteries of
the ( Parkside)
X 20 V Team series, only use a
charger belonging to the
( Parkside) X 20 V Team series.
24
• Charge the battery before
the first time of use.
• Always take heed of the ap-
plicable safety instructions
as well as the environmental
protection regulations and
information.
Checking the charge
status of the rechargeable
battery
The battery charge status indi-
cator (3) signalises the state of
charge of the battery (4).
Press the button (2) on the bat-
tery. The state of charge of the
battery is displayed by illumi-
nating the 3-colour LED lights of
the state of charge display.
3 LEDs light up
(red, orange and green):
Battery is fully charged.
2­LEDs­light­up­(red­and­or-
ange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged