VWR avantor VISISCOPE IT417 PH Manual De Instrucciones página 9

Installing the stage insert
• Install the glass or metal plate according to individual pref-
erences.
Install the stage insert in the stage opening. (Fig. 5)
Installing the eyepieces
Remove the cover of the eyepiece tubes and insert the eyepiec-
es into the tubes. (Fig. 6)
Installing color filters
Place the filter slider ① on the table and insert the desired
1.
colored filter into one of the two empty positions ②. (Fig. 7)
• Take care that the filter is positioned horizontally in the
slider to prevent it from getting stuck during movement.
Installing filter slider
1. Insert the filter slider into the upper slot of the condenser
① with the grooves ② facing the rear of the microscope.
(Fig. 8)
• The slider has two positions to accommodate two colored
filters. Move the slider to the position containing the de-
sired filter until it clicks into place.
vwr.com I Instruction manual INVERTED MICROSCOPE, VISISCOPE
①
IT417 PH
®
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F ig. 7 F ig. 7
②
F ig. 8 F ig. 8
9