Optika Italy IM Serie Manual De Instrucciones página 10

1. Remove one of the knobs ④ from the filter holder. (Fig. 9)
2. Insert the filter holder into the slot in front of the LED housing
⑤. (Fig. 10)
3. When the filter holder is in place, reinstall the filter holder
knob.
8.6 Connecting the power cord
1. Put the main switch ① to "O" (OFF) before connecting the
power cord. (Fig. 11)
2. Insert the plug of the provided power supply into the power
socket of the microscope. (Fig. 12)
④
⑤
Page 10
④
①
F ig. 9 F ig. 9
F ig. 10 F ig. 10
F ig. 11 F ig. 11
F ig. 12 F ig. 12