cecotec Bolero DressCode 9410 Inverter Steel A Manual De Instrucciones página 37

ENGLISH
- The length, and energy and water consumption of each programme may vary according
to the weight and type of laundry, the additional functions active, water, and ambient
temperature.
- It is recommended the use of liquid detergent for washing programmes at low temperature.
You can vary the quantity of detergent according to the quantity of laundry and its soiling
level. Follow the detergent manufacturer recommendations for the quantity of detergent
you must use.
- Noise and remaining moisture level depend on the spin speed. The higher the spin speed,
the higher the noise and the lower the residual moisture content.
- You can find more information on this model by scanning the following QR code and
accessing the database with all information (also found on the energy label):
Bolero
Model Bolero
DressCode
DressCode
10410 Inverter
9410 Inverter
A
Steel A
02178
Reference 02177
QR code
Bolero
Model Bolero
DressCode
DressCode
7410 Inverter
7410 Inverter
Steel A
A
02173
Reference 02172
QR code
72
Bolero Dresscode 7410 Inverter A / Bolero DressCode 7410 Inverter Steel A
Bolero Dresscode 8410 Inverter A/ Bolero DressCode 8410 Inverter Steel A
Bolero Dresscode 9410 Inverter A/ Bolero DressCode 9410 Inverter Steel A
Bolero Dresscode 10410 Inverter A/ Bolero DressCode 10410 Inverter Steel A
Bolero
DressCode
10410 Inverter
Steel A
02179
Bolero Bolero Bolero
DressCode DressCode DressCode
8410 Inverter 8410 Inverter 9410 Inverter
A Steel A A
02174 02175 02176
Control panel
Selection Turn the knob to select a washing programme.
knob
The display shows the current programme information and estimated time
Display
remaining, or an information code when a fault occurs.
Press this button to change the washing-programme water temperature. The
Temp available temperature range varies from programme to programme.
The selected temperature will be shown on the display.
Press this button to change the spin speed of the programme. The available
spin-speed options depend on the programme.
The selected spin speed will be shown on the display.
Spin
speed
Ref. 02172 / 02173 > 400 - 600 - 800 - 1000 - 1200 rpm
Ref. 02174 / 02175 / 02176 / 02177 / 02178 / 02179 > 400 – 600 – 800 – 1000
– 1400 rpm
Delay Press this button repeatedly to cycle through the available options (from 3 to
start 24 hours in one-hour increments).
Press this button to start or stop the washing process:
Start/ Press the button once to start the washing programme.
pause To stop the programme, press the button again.
To resume the programme, press the button again.
Press this button to switch the washing machine on or off.
Power If you switch on the machine and do not press any button within 10 minutes, the
machine will switch off automatically.
Delay Start
You can set the washing machine to automatically end washing at a specific time by choosing
a delay between 3 and 24 hours (in 1-hour increments).
1. Choose the desired programme and change the cycle settings if necessary.
2. Press the Delay Start button repeatedly until the desired end time is set.
3. Press the Start/Pause button.
4. To disable the Delay Start feature, restart the washing machine by pressing the Power
button.
Example:
Current time: 2:00 p.m.
Desired starting time: 5:00 p.m.
Bolero Dresscode 7410 Inverter A / Bolero DressCode 7410 Inverter Steel A
Bolero Dresscode 8410 Inverter A/ Bolero DressCode 8410 Inverter Steel A
Bolero Dresscode 9410 Inverter A/ Bolero DressCode 9410 Inverter Steel A
Bolero Dresscode 10410 Inverter A/ Bolero DressCode 10410 Inverter Steel A
ENGLISH
73