Publicidad
Idiomas disponibles
Idiomas disponibles
Displaying PC Screen on TV
The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 46)
1
Select the external input
2
Select "PC"
■
To return to TV
30
•
Corresponding signals
PC
(p. 29)
Displays
PC screen
■
PC menu setting
(changed as desired)
•
Making settings
"How to Use Menu Functions"
Menu
Item
Normal
Resets PC adjust
•
H&V
: The H and V sync signals are input from the HD/VD connector.
•
Sync
On G : Uses a synchronized signal on the Video G signal, which is input from the G
connector.
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
Dot clock
blurred.
Adjust the horizontal position.
H-position
Adjust the vertical position.
PC
V-position
adjust
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock phase
Clock Phase so that a clear picture appears.
It may not be possible to display a clear picture due to poor input signals.
Note
Switches to wide display.
•
Input
Input signal switched from VGA to WVGA
•
resolution
Input signal switched from XGA to WXGA
Displays the H (Horizontal)/V (Vertical) frequencies.
•
Display range
H-frequency
V-frequency
Horizontal: 15-110kHz
Vertical: 48-120Hz
•
Audio menu (p. 32)
•
For PC input, only audio signals can be output from PROG. OUT terminals.
to
(p. 32)
Adjustments/Configurations(options)
31
Publicidad
