Panasonic TH-50PX600U Manual De Instrucciones página 19

Control with HDMI "HDAVI Control
Recommended HDMI Connections
Follow the connection diagrams below for HDMI control of
a single AV piece of equipment such as a Panasonic DIGA-
DVD recorder, RAM Theater or Player Theater system.
Refer to page 34 for Setup Menu settings and additional
control information.
Optional HDMI and/or optical cables are not provided.
■
Connecting this unit to a DVD recorder, RAM theater or Player theater
Back of the unit
HDMI cable
HDMI HDMI
(AV OUT) (AV OUT)
or
DIGA Panasonic RAM theater
(Panasonic DVD Recorder)
■
Setting of this unit after connection
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") to "On" using the Setup
menu. (p. 34).
Note
•
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
36
TM
If connection (or setting) of equipment compatible with HDMI
control is changed, switch the power of this unit Off then On
again while the power of all equipment is On (so that the
unit can correctly recognize the connected equipment) and
check that DIGA, RAM theater and Player theater playback
operates.
•
For DIGA :
Connect with HDMI cable
•
For RAM theater and Player theater :
Connect with HDMI cable and audio
cable.
Connect the TV's PROG. OUT audio
(L&R) to listen to the TV program
through the theater system.
Note
•
HDMI 1 is recommended.
When connecting to HDMI 2, set the
input mode to HDMI 2 (p. 29) initially
before connecting to HDMI 2. After
connection, confirm the HDMI control
functions (p. 34-35).
Audio Cable
Audio HDMI Audio
IN (AV OUT) IN
or
Panasonic Player theater
"
■
Connecting this unit to a DVD recorder and AV amp
When using an "Control with HDMI" audio-video amplifier and a compatible DIGA recorder, use a daisy chain
connection as shown below.
Optic fiber
Digital audio input
(Optic)
•
One AV amp and one
DIGA recorder can be
operated with this unit.
•
Be sure to connect the AV
amp between this unit and
the DIGA recorder.
■
Setting of this unit after connection
After making connections as shown above, set "Ctrl with HDMI" (under "Other adjust") to "On" using the Setup
menu. (p. 34).
Note
•
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
•
When audio from other equipment connected to this unit via HDMI is output using "DIGITAL AUDIO OUT" of this
unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
Note
•
HDMI 1 is recommended.
When connecting to HDMI 2, set the input mode
to HDMI 2 (p. 29) initially before connecting to
HDMI 2. After connection, confirm the HDMI
HDMI cable
control functions (p. 34-35).
HDMI cable
HDMI HDMI HDMI
(AV OUT) (AV IN) (AV OUT)
DIGA (Panasonic DVD Recorder)
Panasonic AV amp
37