Descargar Imprimir esta página

Panasonic TH-50PX600U Manual De Instrucciones página 27

Televisor digital con pantalla de plasma de alta definición
Ocultar thumbs Ver también para TH-50PX600U:

Publicidad

Idiomas disponibles

Idiomas disponibles

Technical Information
For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL.
(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)
The closed caption is not displayed when you use HDMI connection.
If analog connected equipment is used for displaying or recording, closed caption (CC) should be set On/Off on the
connected equipment.
The CC mode setting of the TV will not affect the analog input.
If a digital program is being output in analog format, the CC data will also be output in analog format.
If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV.
If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.
Let you choose the aspect depending on the format of the received signal and your preference. (p. 18)
FULL
FULL
Enlarges the 4:3 image horizontally to the screen's
side edges.
(Recommended for anamorphic picture)
H-FILL
H-FILL
Enlarges the 4:3 image horizontally to the screen's
side edges. The side edges of the image are cut off.
ZOOM
ZOOM
Enlarges the 4:3 image to the entire screen.
(Recommended for Letter Box)
Zoom adjust
Vertical image position and size can be adjusted in "ZOOM."
Select "Zoom adjust" on the Picture menu. (p. 32)
Vertical position adjustment
To reset the aspect ratio
(OK)
52
Closed Caption (CC)
Aspect Ratio
JUST
JUST
Stretches to justify the 4:3 image to the four corners
of the screen.
(Recommended for normal TV broadcast)
4:3
Side bar
Standard
(Note that "after image" of the side bar may occur from
displaying it for a long time.)
Note
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) : FULL,
JUST, 4:3 or ZOOM
1080p / 1080i / 720p : FULL, H-FILL, JUST, 4:3 or ZOOM.
When the signal is 720p/1080i/1080p, the aspect mode
automatically defaults to Full after turning off the TV,
after changing input mode, or after changed signal
resolution other than 720p/1080i/1080p.
Vertical size adjustment
Data format for Card browsing
Photo:
Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF
standards
Data format:
Baseline JPEG 160X120-2,560X1,920 pixels (Sub-sampling: 4:4:4, 4:4:2 or 4:2:0)
Max. number of files:
9,999
Image resolution:
8 x 8 to 5,120 x 3,840
* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association's standard
Caution
A JPEG image modified with a PC cannot be displayed.
Partly degraded files might be displayed at a reduced resolution.
Note
Folder structure viewed in PC
Created automatically
DCIM
3-digit folder number + 5-digit arbitrary characters
100_PANA
4-digit arbitrary characters + 4-digit file number
P1000001.JPG
P1000002.JPG
Usable characters: 1-byte "a to z", "A to Z", "0 to 9," and "_"
P1000003.JPG
P1000004.JPG
The folder and file names may be different depending on the digital camera used.
Suitable SD Memory Cards. Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs (This site is in English only)
DIGITAL AUDIO OUT terminals
You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier
to the DIGITAL AUDIO OUT terminals.
Caution
Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable
optical output.
External speakers cannot be connected directly to PROG.OUT terminals.
When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC
channel is selected, the output will be PCM.
Control with HDMI "HDAVI Control
HDMI connections to some Panasonic equipment allow you to enjoy the easy playback or home theater.
Setup the equipment to enable this function. Read the manual of the equipment.
Switch the TV unit on again with the equipment on when connection or setup is changed.
This function may not work normally depending on the equipment condition.
The equipment can be operated by TV's remote control with this function on even if TV is in Standby mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.
TM
"
53

Publicidad

loading

Este manual también es adecuado para:

Th-42px600uTh-58px600uTh-42px600Th-50px600