Panasonic MC-UG581 Instrucciones De Operación página 16

+
Lift Agitator Up
Soulever l'agitateur
Inidad del agitador
+
Install New Belt
Poser la nouvelle
Motor Shaft
courroie
Arbre
Instalaciòn de la
d'entraînement
correa
du moteur
Eje del motor
+
Groove
End Cap
Ouverture
Bouchon
Ranura
Tapa del extremo
Replacing Belt
➢ ➢ Remove lower plate.
➢ ➢ Remove agitator by carefully lifting
out.
➢ ➢ Remove worn or broken belt.
➢ ➢ Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct
belt routing.
➢ ➢ Reinstall agitator back into nozzle
housing grooves.
➢ ➢ After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
➢ ➢ Reinstall lower plate.
- 28 -
Nettoyage latéral
➢ Cette caractéristique facilite le
nettoyage de moquettes le long des
plinthes ou des meubles.
- 1