Panasonic MC-UG581 Instrucciones De Operación página 19

Cover
(Suction Inlet)
Hose
Tuyau
Manguera
+
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum cleaner.
➢ ➢ Pull open suction inlet cover and
check for clogging.
➢ ➢ Remove lower plate.
Couvercle
(entrée
d'aspiration)
➢ ➢ Remove hose from nozzle by lifting
Cubierta
(Abertura de straight up.
aspiracón)
➢ ➢ Inspect hose end and clear any
obstructions.
Hose
➢ ➢ Reinstall hose and lower plate.
Tuyau
Manguera
- 34 -
Power Motor Protector
120V AC(60Hz)
Tableau des c
Alimentation Protecteur du moteur
120V c.a. (60Hz)
Diagrama de c
Voltaje Protector de motor
120V c.a. (60Hz)
FEATUR
Yes
Oui
Si
- 1