Publicidad
Idiomas disponibles
Idiomas disponibles
• Never transport the device while the drive is
running.
• Switch off the device and disconnect the
mains plug from the socket. Make sure that
all moving parts have come to a complete
stop:
• when leaving the device,,
• before changing the accessories,,
• before removing obstructions or loosen-
ing blockages,,
• before checking the device, cleaning it
or performing maintenance work on it.
• If the device starts to vibrate abnormally
strong, an immediate inspection is required:
• search for signs of damage,
• replace damaged parts,
• contact the service centre.
Cleaning, maintenance and storage
• Allow the motor to cool down before stor-
ing the device for a longer period.
• Replace worn or damaged parts in the in-
terests of safety. Use only original spare
parts and accessories.
• The device may only be opened by an au-
thorised electrician. Always contact our ser-
vice centre for repairs.
• Switch the drive off, disconnect the device
from the power supply and allow the device
to cool off if you want to clean, adjust, store
the device or to exchange an accessory
part.
• Handle the device with care and keep it
clean.
• Store the device out of reach of children.
Preparation
WARNING! Risk of injury due to uninten-
tional start-up. Do not insert the plug into the
socket until the device is fully prepared for use.
Operating elements and how
they work
Familiarise yourself with the operating elements
before using the device for the first time.
Trigger gun (1)
• Switch lever (13)
• Pulling the switch lever: Activates the
pressure jet
• Releasing the switch lever: Deactivates
the pressure jet
• Switch lever child safety lock (16)
(seen from behind)
⭠ The switch lever is locked ὑ.
⭢ You can pull the switch lever ὑ.
WARNING! Risk of injury due to pres-
sure jet! Lock the switch lever every time you
take a break.
Bow-type handle (29)
With the bow-type handle folded out, you can
conveniently roll the device.
• The handle can only be folded out if the
holders for the mains connection cable (6)
are pushed in.
• Folding out the handle:
Press the release (4) and fold the bow-type
handle up.
• Putting the handle away:
Press the release and fold the bow-type
handle down.
Establishing a water supply
Requirements
• Supply hose: Garden hose with fitted
garden hose adaptor (not included);
⌀ 13 mm (½"); length between 5 m and
30 m
• Minimum pump capacity: 5.2 l/min
(312 l/h)
• System separator
A system separator (check valve) prevents
the backflow of water and cleaning agent
into the drinking water pipeline.
• According to current regulations, a pres-
sure washer must never be connected
to the drinking water network without a
system separator. A suitable system sep-
arator must be used in accordance with
EN 12729 Type BA.
GB
MT
21
Publicidad
