HP OFFICEJET 6500A Guia De Instalacion página 11

If you want to configure this setting...
Distinctive Ring
Change the answer ring pattern for distinctive ring
Note: If you are using a distinctive ring service, you
can use more than one telephone number on the same
telephone line. You can change this setting to enable
the printer to determine automatically which ring
pattern it should use for fax calls only.
Tip: You can also use the Ring Pattern Detection feature
in the printer's control panel to set distinctive ring. With
this feature, the printer recognizes and records the ring
pattern of an incoming call and, based on this call,
automatically determines the distinctive ring pattern
assigned by your telephone company to fax calls.
Fax Speed
Set the fax speed used to communicate between the printer
and other fax machines when sending and receiving faxes.
Note: If you experience problems sending and
receiving faxes, try using a lower fax speed.
Fax Error Correction Mode
If the printer detects an error signal during the transmission
and the error-correction setting is turned on, the printer can
request that a portion of the fax be resent.
Note: If you have problems sending and receiving
faxes, turn off error correction. Also, turning off this
setting might be useful when you are trying to send a
fax to another country/region or receive a fax from
another country/region or if you are using a satellite
phone connection.
Volume
Change the volume of the printer sounds, including the fax
tones.
...do this:
1. Touch right arrow and then touch Setup.
2. Touch Fax Setup, and then touch Advanced Fax Setup.
3. Touch Distinctive Ring.
4. A message appears stating that this setting should not
be changed unless you have multiple phone numbers on
the same telephone line. Touch Yes to continue.
5. Do one of the following:
• Touch the ring pattern assigned by your telephone
company to fax calls.
Or
• Touch Ring Pattern Detection, and then follow the
instructions on the printer's control panel.
Note: If you are using either a PBX phone system that
has different ring patterns for internal and external
calls, you must call the fax number from an external
number.
1. Touch right arrow and then touch Setup.
2. Touch Fax Setup, and then touch Advanced Fax Setup.
3. Touch down arrow , and then touch Fax Speed.
4. Touch to touch Fast, Medium, or Slow.
1. Touch right arrow and then touch Setup.
2. Touch Fax Setup, and then touch Advanced Fax Setup.
3. Touch down arrow , and then touch Error Correction
Mode.
4. Select On or Off.
1. Touch right arrow and then touch Setup.
2. Touch Fax Setup, and then touch Basic Fax Setup.
3. Touch down arrow , and then touch Fax Sound
Volume.
4. Touch to touch Soft, Loud, or Off.
Set up and use fax 9