Step 3. Restart components of the wireless network
Turn off the router and the printer, and then turn them back
on in this order: router first, and then the printer.
If you still are unable to connect, turn off the router, printer,
and your computer, and then turn them back on in this order:
router first, then the printer, and finally the computer.
Step 4. Run the Wireless Network Test
For wireless networking issues, run the Wireless Test from the
printer's control panel:
1.
Touch right arrow
, and then touch Network.
2.
Touch Wireless, and then touch Wireless Network Test.
Sometimes, turning off the power and then turning it back on
will recover a network communication issue.
If a problem is detected, the printed test report will include
recommendations that might help solve the problem.
Solve setup problems
21