Publicidad
Idiomas disponibles
Idiomas disponibles
SHE 16 18-EC
Repairs
Repairs may only be carried out by an au-
thorised customer service centre.
Replacement of wear parts
Upper blade/lower blade
Unscrew the fastening screw with an Allen
key (1.).
Remove the upper blade and insert it
rotated by 90° (must be flush with a cutting
edge on the inclined surface of the
plunger) (2.).
Unscrew the fastening screw with an Allen
key (3.).
Remove the lower blade and insert it
rotated by 90° (4.).
Set the distance between the blades and
retighten the blades.
Cutting table
Unscrew the fastening screw with an Allen
key (1.).
Remove the cutting table and attach a new
one (2.).
Spare parts and accessories
Other accessories can be found in
the manufacturer's catalogues. Exploded
drawings and spare-part lists can be found
on our homepage: www.flex-tools.com
Disposal information
WARNING!
End-of-life power tools must be rendered
inoperable before disposal.
For mains-operated power tools, remove
–
the mains cable.
For battery-operated power tools, remove
–
the battery.
EU countries only
Do not dispose of electric power tools
in the household waste!
In accordance with the European directive
2012/19/EU on Waste Electrical and Elec-
tronic Equipment and its incorporation into
national law, end-of-life electric power tools
must be collected separately and recycled
in an environmentally-friendly manner.
Recycling raw materials instead of
waste disposal.
Device, accessories and packaging should
be recycled in an environmentally-friendly
manner. Plastic parts are identified for recy-
cling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open end-of-life
batteries.
EU countries only: defective or end-of-life
batteries must be recycled in accordance
with directive 2006/66/EC.
NOTE
Please ask your dealer about disposal
options.
19
Publicidad
